Colocation Exit: Decommission NetApp AFF & FAS Dubai

Quick answer: A good colocation exit has four parts: get access approval early, shut the array down properly, handle the heavy shelves with care, and keep cables, rails and bezels with each unit. Send us your site, equipment list and dates, and we’ll plan around them.

A colocation exit with NetApp AFF or FAS storage in Dubai goes wrong in the planning, not at the rack. Missing passes and rushed power-offs cost more than any price gap.

Send your site and list on WhatsApp (+971 52 857 3495), or start on our server and storage selling page.

Step 1: Get Access Approved Early

Data centres in Dubai and Abu Dhabi usually need approval before people and equipment enter or leave. Each operator has its own rules. Ask yours, in writing, what they need. Typical items are crew names, vehicle details and a list of the equipment leaving.

Do this first. Everything else depends on the date they give you. Our Dell decommissioning guide covers the same planning.

Step 2: Shut Down the Array Properly

Don’t just pull the power cords. NetApp arrays work in pairs and protect recent writes in special memory. A clean shutdown lets that finish.

The exact steps depend on your ONTAP version. Ask your storage admin to follow NetApp’s shutdown guide at docs.netapp.com. Confirm every unit is fully off before anyone touches a cable. Export the drive list and serial numbers first, because you can’t read them after.

Ops note: photograph the rack front and back before anything is unplugged. It records cable routes and shelf order.

Step 3: Label Cables and Keep the Small Parts

Storage cables look alike. Label both ends of every cable before you unplug it. Bag each shelf’s cables with its asset tag. Keep rack rails, front bezels and power cords with the unit they belong to.

Leave network optics fitted if the buyer expects them, and tell us if you plan to keep them. A matched rail kit is part of a complete unit. A missing one is a deduction.

Step 4: Handle the Heavy Shelves Safely

The biggest shelves are very heavy when full. The 60-bay DS460C is the one to plan for. Check its weight and handling advice in NetApp’s documentation before the day.

Never rely on one person at the front of a heavy shelf. Use a server lift if you have one. Some teams unseat drives into numbered trays first to cut the weight. If you do that, label every drive with its slot, because each must go back in the right place.

StepWhat to doAccess
AccessGet approval in writingThe exit can stall without it
ShutdownClean ONTAP shutdownProtects recent writes
CablesLabel both ends, bag per shelfEasy to reassemble
Rails and bezelsKeep with each unitComplete units sell better
Heavy shelvesSafetySafety
DrivesWipe or pull per policySee our NetApp data wipe guide

Sell the Whole Cage

A storage exit rarely stops at the arrays. The switches that connect them, and the racks and power units, can go in the same visit. List them on separate lines, with models and quantities.

For how the arrays are valued, see our NetApp selling guide . For the data side, read our NetApp data wipe guide. Follow NIST SP 800-88 for any media that leaves your control. Our inspection and payment page explains how a sale works.

Plan Your NetApp Exit with Us

Send your site and list to +971 52 857 3495 or info@selltechdubai.com. For a mixed clearance, use office IT equipment buyback . The final offer depends on inspection.