Controllers, Cache & Caddies on NetApp AFF and FAS
Quick answer: Look at the back of the box. Two matched controllers make it a “head unit,” which is worth the most. Cache cards and network cards add value, so leave them fitted. And keep the empty drive trays in the bays. Photograph the rear and send it with the model.
Two NetApp boxes can look identical from the front and be worth very different amounts. The difference is behind them. These are the NetApp AFF and FAS storage array controller, cache and caddy valuation factors that matter.
Send a rear photo on WhatsApp (+971 52 857 3495), or start on our server and storage selling page.
Factor 1: Controllers or Just a Shelf?
A head unit holds two controllers, which are the brains of the array. A plain shelf only adds drive bays. The head unit is worth much more, because it runs the system.
Check the back. Controllers have network and management ports. A shelf has small connector modules instead. Our Dell controllers guide explains the same idea. Confirm that both controllers are present and matched. One missing controller means fewer buyers.
NetApp lists the models in its Hardware Universe. Match your model number there.
Factor 2: Cache Cards Inside
Some NetApp controllers contain extra cards. One is a flash cache card, which speeds up reads. Another is a memory card that protects recent writes.
Leave these fitted. They belong to the controller, and the unit is not complete without them. A common mistake is to remove “extra” cards when pulling drives. Check your model before anyone opens a controller, and ask us if you are not sure.
Factor 3: Network Cards and Optics
Extra network cards add value. They can be Fibre Channel, 25-gigabit or 100-gigabit Ethernet, depending on the system. Note the type of each card from its label.
Leave the small plug-in optics fitted if the buyer expects them. They protect the ports and show what the array was running. If your policy says optics stay with you, tell us before the visit.
Factor 4: Drive Caddies
A caddy is the tray that holds a drive in its bay. Each NetApp shelf generation has its own style. A tray from one shelf may not fit another, so you can’t swap in just any tray.
If you pull the drives, slide the empty trays back into the bays. A buyer who has to find trays will lower the offer. Keep the small screws too. Take a photo of the empty bays before pickup.
| What we check | Can lower the offer | Can lower the offer |
|---|---|---|
| Controllers | Two matched, healthy | One missing or mismatched |
| Cache cards | Fitted | Removed |
| Network cards | Fitted, with optics | Missing |
| Drive caddies | Empty trays in the bays | Missing trays |
| Front bezel and rails | Present | Missing |
| Condition | Clean, no fault lights | Faults, damage |
What to Photograph
Take these photos:
- The front of every unit
- The rear of every unit, showing controllers and cards
- The labels with model and serial numbers
- A few drive labels
- Any fault lights
For how complete arrays are valued, see our NetApp selling guide . If you are pulling drives, read our NetApp data wipe guide. For a full exit, see the NetApp colocation guide.
The final offer depends on inspection. See NIST SP 800-88 for data handling, and our inspection and payment page.



